Installing Grit Tape

  1. Testing of adhesion to the surface should be done before installation. Cut GRIT TAPE to the desired length before applying to the surface.
  2. Do not apply GRIT TAPE when the surface temperature is below 50 degrees Fahrenheit.
  3. Fill in cracks, seal porous surfaces and repair to a smooth finish, as required, avoid application to grout areas.
  4. Always apply GRIT TAPE to a clean, dry, wax and oil-free surface. Allow ample time for drying.
  5. Peel off the protective release paper from GRIT TAPE.
  6. Press GRIT TAPE to the prepared surface. Bond is increased by using a rubber hand roller over the applied treads.
  7. GRIT TAPE is ready for immediate use, no need to wait.
  8. Keep GRIT TAPE clean. Use mild floor cleaners as directed.
  9. Application to porous surfaces is not recommended.

 You can download a pdf copy of the installation instructions here.